HIKVISION SECURITY CAMERA Bullet
2MP CCTV POC 40m DS-2CE16D8T-IT3E/G
HIKVISION SECURITY CAMERA the DS-2CE16D8T-IT3E 2MP fixed lens ultra low-light PoC EXIR bullet camera.
2 Megapixel camera with Progressive Scan CMOS sensor and HD-TVI (High Definition Transport Video Interface).
The HD-TVI interface allows to transmission of analog video signal via coaxial cable at resolutions up to 1080p. It enables the transmission of HD resolution images for even 500 m distance with keeping the low costs of the installation. During transmission there are no delays and is maintained the original, high quality image.
The 3-Axis integrated camera bracket has a regulation in all three planes, which allows to turn the camera to any direction. Camera is according to IP67 Index of Protection norm.
|Image Sensor:||2MP CMOS Image Sensor|
|Shutter Time:||1/25(1/30) s to 1/50,000 s|
|Adjustment Range:||Pan: 0° to 360°, Tilt: 0° to 180°, Rotate: 0° to 360°|
|Day & Night:||IR cut filter|
|Video Frame Rate:||1080p@25fps/1080p@30fps|
|HD Video Output:||1 Analog HD output|
|D/N Mode:||Auto / Color / B/W|
|Auto White Balance:||Auto/MWB|
|Operating Conditions:||–40 °C – 60 °C (-40 °F – 140 °F)
Humidity 90% or less (non-condensing)
|Power Supply:||12 VDC±25%/PoC.at|
|IR Range:||Up to 80m|
|Communication :||Up the coax
Protocol: HIKVISION-C (Coaxitron)
|Weight:||Approx. 680g (1.5lb)|
POC – MAKING INSTALLATIONS A LOT SIMPLER!
Power over Coaxial (PoC) basically means that power for the camera is supplied by the DVR via coaxial video cable (RG59 or similar), this removes the requirement for separate cables and power supplies which would otherwise be needed to power your cameras. For installers this means a much more time and cost efficient
PoC can be used on cable runs up to 200 metres and is available in 4,8 and 16 channel DVRs (models ending /P), a full complement of TVI PoC cameras are also available (models ending E) which together offer a cost effective and time saving solution to your TVI installations.
PLEASE NOTE: All PoC cameras can also work on non PoC recorders
1. All PoC capable TVI cameras can be powered locally via a separate power supply allowing them to be used on a none PoC TVI DVR
2. All none PoC TVI cameras can work on a PoC capable TVI DVR as the camera is powered via a separate power supply and PoC will only transmit when requested to by a compatible camera
3. PoC transmission must be used through RG59 coaxial or similar cable, it will not pass through CAT5/6 passive/active balun configurations